My JetDrive Go can work on some computers but fail to be recognized by some platforms or shows “USB Device Not Recognized.”

Category : Setup / Operation

If the JetDrive Go can work normally on some platforms, the problem probably lies on your computer system. You may want to try the following steps to solve this problem:

 

  • Windows OS:


(1) If you had previously installed any USB driver for other device, please remove it first.

(2) Put your computer to safe mode before removing all the unknown devices (Device Manager > Universal Serial Bus Controllers).

(3) Restart your computer in normal mode, and then reconnect the JetDrive Go. 

 

If the above steps cannot solve your problem, please upgrade the BIOS settings, and make sure that the USB setting is enabled.

(1) Enter BIOS > Load Optimized Defaults [Y] > Integrated Peripherals > USB Legacy support [Enabled] > Save & Exit Setup [Y].
(2) Re-install the USB driver for your computer motherboard. 
(3) Update the BIOS for your motherboard.

 

  • Mac OS X:

(1) Make sure your JetDrive Go is FAT32 or exFAT.

(2) Please plug in another USB port to test if it can be properly recognized. Please contact Apple for technical support regarding the abnormal USB port.

Is the answer helpful?

Technische support

If the answer can't help you, you can contact the Tech Support Department

Starten

U hebt al cookies geaccepteerd, maar u kunt uw toestemming op elk gewenst moment intrekken. Zie voor meer informatie onzeCookie Statement. Instellingen veranderen

U hebt cookies al geweigerd, maar u kunt op elk gewenst moment uw toestemming geven. Zie meer voor informatie onze Cookie Statement. Instellingen veranderen